PALLET FIXTURES
ANGLE PLATES
MAGNETIC CHUCKS




Standard Sizes in Stock!!
Square Column, Rectangular Column, T-Type Window,
T-Slotted, Hexogonal Column, Octagonal Column


*Provides a solid base for mounting vises, fixtures, or sub plates.
*Made from one piece, class 40 cast iron that has been stress releived.
*Base and sides milled flat, parallel, and square to .oo1" in 12". DIN mounting standard, JIS mounting optional.
*All square columns have drilled and tapped lifting holes in the top surface and coolant drain holes at the base of the column.
*Available in plain milled or drilled & tapped with 3/8-16 holes on a 2" grid pattern.

Slotted Angle Plates - Webbed & Open-End Type
WEBBED STYLE
4-1/2"x3-1/2"x3" Webbed 3 Lbs. $16.05
7"x5-1/2"x4-1/2" Webbed 10 Lbs. $29.35
10"x8"x6" Webbed 22 Lbs. $54.70
12"x9"x8" Webbed 44 Lbs. $70.70
OPEN-END TYPE
4-1/2"x3-1/2"x3" Open-End 3 Lbs. $20.05
7"x5-1/2"x4-1/2" Open-End 10 Lbs. $40.09
10"x8"x6" Open-End 22 Lbs. $91.45
12"x9"x8" Open-End 44 Lbs. $106.70
Made of high quality fine grained cast iron, stress relieved.
Clamping slots for easy mounting of workpieces.
Webbed type-2 faces and all ends machined square and parallel within .001" per 6".
Open-end type-4 faces and all ends machined square and parallel within .002" per 6".

Adjustable Angle Plates
5"x7" 3-3/4" 20 Lbs. $100.05
7"x10" 5" 44 Lbs. $173.40
10"x15" 6-1/2" 90 Lbs. $264.15
Set up work at any angle during milling or other operations.
Heavy rugged graded casting.
Machined "T" slots.
Graduated 90 for setting 45 on each side.
Accuracy of table surface .005mm

Suburban Tool Rectangular Magnetic Chucks
7"x4"x2-5/8" 1/4"x1/8" 19 lbs. Standard $387.60
10"x5"x2-5/8" 1/4"x1/8" 35 lbs. Standard $515.85
12"x6"x2-5/8" 1/4"x1/8" 47 lbs. Standard $690.65
14"x6"x2-5/8" 1/4"x1/8" 55 lbs. Standard $774.25
18"x6"x2-5/8" 1/4"x1/8" 70 lbs. Standard $917.70
12"x8"x2-5/8" 1/4"x1/8" 63 lbs. Standard $865.45

Standard Pole Features:
1/4" Poles and 1/8" separators produce deep flux lines for holding thick parts.
Ceramic magnets will not lose power.
Removable handle.
Sealed against dirt and liquids.
Ideal height for work clearance

Demagnetizers
$35
Features:

Demagnetizes tools such as dies, cutters and punches
Table Type
115 VAC with On/Off. switch
Table size: 6-3/4" x 4-1/4"



TOLL FREE TEL: 800-642-6459
FAX TOLL FREE: 800-552-5320