Milling Machines, Bandsaws, Lathes, Drill Presses, Presses, Sanders
Jet, Wilton, Prazi, Dake, Kalamazoo, Darex, Baldor, Fadal, Haas, Republic Lagun, Cosen, Kent, Birmingham
TO SEARCH FOR HUNDREDS OF MACHINES CLICK BELOW
FTV-1 Lagun Vertical Knee Mill
Variable Speed Head Stock
Head Type: Head Variable Speed
Spindle Speed (Hi-Low): 55 - 4,250 RPM
Spindle Taper (diameter): R-8; Opt. #40 NST: 30 or Universal (33 3/8"; 85mm)
Head Rotation: Left & Right; Backward & Forward (Knuckle Joint)
Main Motor (constant): 3HP
Table Size: 44" X 10" (1,118 x 254mm)
Table & Cross Travels: 30" x 16" (762 x 406mm)
Ways Double Support: Square Ways for Rigidy and Dove Tail Guides for Accuracy Hardened and Ground Square Ways (opt.)
Work Capacity: 750lbs. (907kg) Maxium Work Load with Uniform Distribution
Machine Weight: 2,750lb (1,247kg)
Power feeds: longitudinal, cross and vertical
Digital Readouts: 2 & 3 axis readout
Square Ways: hardened and ground
Machine work light
Special electrics - U.L. approved
13" Swing American Turnmaster
High Speed Precision Geared Head Lathe
• 16 speed geared headstock
• Hardened (Reishauer ground gears
• Induction hardened bedways
• Large 1 9/16" spindle bore
• Camlock spindle nose
• 5 HP main motor
• Saddle w/ anti-friction replaceable Turcite pads
• Hydraulic unit
• Tailstock spindle with built-in Tang
• Removeable gap
• Apron lead screw / feed red reverse
• Foot brake
• Rear mounted electricals
• Low voltage controls
• High pressure lubrication to head stock, carriage, X slide & apron.
JET 8" X 36" VERTICAL MILLING MACHINES
5 Speed - 1 Phase $3,575.00 10 Speed - 3 Phase $3,575.00
Precision bored and honed milling head.
Large diameter quill is chromed.
High precision spindle bearings.
Table, knee and saddle feature a lock.
Precision ground table.
Head tilts left or right.
Graduated scale on column.
Precision ground dovetail ways.
Equipped with fine downfeed.
One-shot lubrication system.
Tool box with tools.
Jet 13" X 40" Geared Head Bench Lathe
Hardened and ground gears are featured in the headstock and gearbox.
D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings.
Headstock is constantly oiled during operation.
Gear box gives large threading and feed capabilities with no gear changes.
V-way bed design is induction hardened and ground.
Gap bed section provided for larger diameter work.
Independent leadscrew and feed rod.
Spindle actuation control is apron-mounted.
Compound and cross slide have backlash elimination.
Adjustable gibs are incorporated in the carriage and slideways.
Tailstock may be offset for turning tapers and includes an inch-metric graduated quill.
Stand not Inlcuded optional.
Tolerance test certificate included.
6" 3-Jaw direct mount chuck with top reversing jaws.
8" 4-Jaw chuck.
12" Face plate.
4-Way tool post.
Steady and follow rest.
Metric change gear.
Centers and headstock center sleeve.
Tool box and tools.
JET HORIZONTAL BANDSAW
9" x 16" & 10" x 18"
Top mounted control panel.
Large hand wheel and built-in gage for easy blade tensioning.
Coolant is distributed through blade guides.
Blade guides feature parallel double row ball-bearing support.
Blade brush is built-in, self propelled.
Quick-positioning vise with fully adjustable jaws swivel to 45°.
Removable chip tray for quick clean-up.
Blade is fully guarded.
Fully adjustable hydraulic downfeed with separate on/off valve.
Complete coolant system.
Carbide blade guides with rollers.
Bi-metal 4/6 TPI saw blade.
Adjustable material stop.
Wilton 15" & 20" Tradesman Drill Presses
15" - 12 Speed - 1/2 HP, 1725 RPM, 115V, 1 PH $483.60
20" - 12 Speed - 1 HP, 1725 RPM, 115V, 1 PH $1,036.95
15" & 20" Models have rugged cast iron design with a ground steel column for lasting drilling performance in metal, wood or plastic.
Head casting has a permanently lubricated ball-bearing spindle assembly, using four heavy-duty ball-bearings mounted in an enclosed quill for extended life.
Push button switch.
Jet Combined Milling & Drilling Machines
Milling/Drilling Machine - 1" Capacity $1,875.76
Milling/Drilling Machine - 1-1/4" Capacity $2,501.63
Optional Stand For #46550018F $303.15
Does milling, drilling and boring operations.
Front mounted switch.
Enclosed return spring.
Easy head adjustment.
Rack and pinion for raising and lowering head.
Adjustable table gibs.
Heavy cast column.
Massive head casting.
Head swivels 360°.
Wilton Tradesman Combination Belt & Disc Finishing Machine
6" x 48" Belt.
Two cast iron tilting tables for mitering applications.
Full access to the belt when tilted in the horizontal position.
Dust collection shrouds on belt and disc.
Quick-release tension mechanism makes belt changes quick and easy.
Enclosed base protects motor from sanding dust.
1 HP, 1 Ph, 115V motor.
*More Capacity, cuts 1-1/2 solid, 2" pipe
*1/2 wheel arbor
*Spark deflectors, front and rear, standard
Dimensions- L 22 x w 10 x H 14
8" abrasive cut-off saw. 3HP TEFC motor, 1PH (110/220) or 3 PH (220/440).
90 Lbs. Spindle RPM-4900
*20" abarasive wheel
*Rugged cast-iron trunnion and arm. Super rigid, super accurate.
*Heavy-duty guards, efficient spark chute.
*Fast, foot-operated chain vise.
*1" wheel arbor.
*Sealed ball bearings.
*Table 18" wide x 30" deep.
*Capacity 4" solids, 6" shapes.
*15 HP, magnetic starter
Jet Surface Grinder
24V magnetic controls. Complete coolant system.
Worklamp. Grinding wheel.
Wheel adaptors. Wheel dresser.
Balancing arbor. Tool box and tools.
Grinding capacity: 18"L x 6"W x 10-3/4"H
Spindle speed: 3,450 RPM
Grinding wheel diameter: 7"
Grinding wheel thickness: 1/2"
Center hole: 1-1/4"
Table working surface: 6" x 18"
Motor: 1 HP, 3 Ph, 230V
Net weight: 1,364 lbs.
Heavy Duty Arbor Presses
1/2 Ton Arbor Press $15
1 Ton Arbor Press $23
2 Ton Arbor Press $55
3 Ton Arbor Press $75
5 Ton Arbor Press $325
4 position steel anvil
Lever arm may be repositioned for easy of use
Side and front gib adjustments
Jet 4" X 6" Horizontal/Vertical Bandsaw
For Metal or Plastic
UL listed motor.
Can be used horizontally or vertically.
Cuts, shapes or contours as well as routine notching and slitting.
Adjustable ball-bearing guides.
Heat treated steel worm gear and bronze drive.
Gear is in a sealed lubricated box.
3 Cutting speeds.
45° Angle vise.
1/2 HP, 1 Ph, 115/230V.
Capacity: 4-1/8" round, 4" x 6" flat.